17 Library introduction [library]

The C++ standard library provides definitions for the following types of entities: macros, values, types, templates, classes, functions, objects.

All library entities except macros, operator new and operator delete are defined within the namespace std or namespaces nested within namespace std.173 It is unspecified whether names declared in a specific namespace are declared directly in that namespace or in an inline namespace inside that namespace.174

Whenever a name x defined in the standard library is mentioned, the name x is assumed to be fully qualified as ::std::x, unless explicitly described otherwise. For example, if the Effects section for library function F is described as calling library function G, the function ::std::G is meant.

Each element of the C++ standard library is declared or defined (as appropriate) in a header.175

The C++ standard library provides 53 C++ library headers, as shown in Table [tab:cpp.library.headers].

The facilities of the C standard Library are provided in 26 additional headers, as shown in Table [tab:cpp.c.headers].

Except as noted in Clauses [language.support] through [thread] and Annex [depr], the contents of each header cname shall be the same as that of the corresponding header name.h, as specified in the C standard library ([intro.refs]) or the C Unicode TR, as appropriate, as if by inclusion. In the C++ standard library, however, the declarations (except for names which are defined as macros in C) are within namespace scope ([basic.scope.namespace]) of the namespace std. It is unspecified whether these names are first declared within the global namespace scope and are then injected into namespace std by explicit using-declarations ([namespace.udecl]).

Names which are defined as macros in C shall be defined as macros in the C++ standard library, even if C grants license for implementation as functions. [ Note: The names defined as macros in C include the following: assert, offsetof, setjmp, va_arg, va_end, and va_start.  — end note ]

Names that are defined as functions in C shall be defined as functions in the C++ standard library.176

Identifiers that are keywords or operators in C++ shall not be defined as macros in C++ standard library headers.177

[depr.c.headers], C standard library headers, describes the effects of using the name.h (C header) form in a C++ program.178

Two kinds of implementations are defined: hosted and freestanding ([intro.compliance]). For a hosted implementation, this International Standard describes the set of available headers.

A freestanding implementation has an implementation-defined set of headers. This set shall include at least the headers shown in Table [tab:cpp.headers.freestanding].

The supplied version of the header <cstdlib> shall declare at least the functions abort, atexit, at_quick_exit, exit, and quick_exit ([support.start.term]). The other headers listed in this table shall meet the same requirements as for a hosted implementation.

This section describes how a C++ program gains access to the facilities of the C++ standard library. [using.headers] describes effects during translation phase 4, while [using.linkage] describes effects during phase 8 ([lex.phases]).

The entities in the C++ standard library are defined in headers, whose contents are made available to a translation unit when it contains the appropriate #include preprocessing directive ([cpp.include]).

A translation unit may include library headers in any order (Clause [lex]). Each may be included more than once, with no effect different from being included exactly once, except that the effect of including either <cassert> or <assert.h> depends each time on the lexically current definition of NDEBUG.179

A translation unit shall include a header only outside of any external declaration or definition, and shall include the header lexically before the first reference in that translation unit to any of the entities declared in that header. No diagnostic is required.

Entities in the C++ standard library have external linkage ([basic.link]). Unless otherwise specified, objects and functions have the default extern "C++" linkage ([dcl.link]).

Whether a name from the C standard library declared with external linkage has extern "C" or extern "C++" linkage is implementation-defined. It is recommended that an implementation use extern "C++" linkage for this purpose.180

Objects and functions defined in the library and required by a C++ program are included in the program prior to program startup.

See also: replacement functions ([replacement.functions]), run-time changes ([handler.functions]).

The template definitions in the C++ standard library refer to various named requirements whose details are set out in tables [equalitycomparable]–[destructible]. In these tables, T is an object or reference type to be supplied by a C++ program instantiating a template; a, b, and c are values of type (possibly const) T; s and t are modifiable lvalues of type T; u denotes an identifier; rv is an rvalue of type T; and v is an lvalue of type (possibly const) T or an rvalue of type const T.

In general, a default constructor is not required. Certain container class member function signatures specify T() as a default argument. T() shall be a well-defined expression ([dcl.init]) if one of those signatures is called using the default argument ([dcl.fct.default]).

This subclause provides definitions for swappable types and expressions. In these definitions, let t denote an expression of type T, and let u denote an expression of type U.

An object t is swappable with an object u if and only if:

• (2.1)

  the expressions swap(t, u) and swap(u, t) are valid when evaluated in the context described below, and

• (2.2)

  these expressions have the following effects:

  • (2.2.1)

    the object referred to by t has the value originally held by u and

  • (2.2.2)

    the object referred to by u has the value originally held by t.

The context in which swap(t, u) and swap(u, t) are evaluated shall ensure that a binary non-member function named “swap” is selected via overload resolution ([over.match]) on a candidate set that includes:

• (3.1)

  the two swap function templates defined in <utility> ([utility]) and

• (3.2)

  the lookup set produced by argument-dependent lookup ([basic.lookup.argdep]).

[ Note: If T and U are both fundamental types or arrays of fundamental types and the declarations from the header <utility> are in scope, the overall lookup set described above is equivalent to that of the qualified name lookup applied to the expression std::swap(t, u) or std::swap(u, t) as appropriate.  — end note ]

[ Note: It is unspecified whether a library component that has a swappable requirement includes the header <utility> to ensure an appropriate evaluation context.  — end note ]

An rvalue or lvalue t is swappable if and only if t is swappable with any rvalue or lvalue, respectively, of type T.

A type X satisfying any of the iterator requirements ([iterator.requirements]) satisfies the requirements of ValueSwappable if, for any dereferenceable object x of type X, *x is swappable.

[ Example: User code can ensure that the evaluation of swap calls is performed in an appropriate context under the various conditions as follows:

#include <utility>

// Requires: std::forward<T>(t) shall be swappable with std::forward<U>(u).
template <class T, class U>
void value_swap(T&& t, U&& u) {
  using std::swap;
  swap(std::forward<T>(t), std::forward<U>(u)); // OK: uses “swappable with” conditions
                                                // for rvalues and lvalues
}

// Requires: lvalues of T shall be swappable.
template <class T>
void lv_swap(T& t1 T& t2) {
  using std::swap;
  swap(t1, t2);                                 // OK: uses swappable conditions for
}                                               // lvalues of type T

namespace N {
  struct A { int m; };
  struct Proxy { A* a; };
  Proxy proxy(A& a) { return Proxy{ &a }; }

  void swap(A& x, Proxy p) {
    std::swap(x.m, p.a->m);                     // OK: uses context equivalent to swappable
                                                // conditions for fundamental types
  }
  void swap(Proxy p, A& x) { swap(x, p); }      // satisfy symmetry constraint
}

int main() {
  int i = 1, j = 2;
  lv_swap(i, j);
  assert(i == 2 && j == 1);

  N::A a1 = { 5 }, a2 = { -5 };
  value_swap(a1, proxy(a2));
  assert(a1.m == -5 && a2.m == 5);
}

 — end example ]

A NullablePointer type is a pointer-like type that supports null values. A type P meets the requirements of NullablePointer if:

• (1.1)

  P satisfies the requirements of EqualityComparable, DefaultConstructible, CopyConstructible, CopyAssignable, and Destructible,

• (1.2)

  lvalues of type P are swappable ([swappable.requirements]),

• (1.3)

  the expressions shown in Table [nullablepointer] are valid and have the indicated semantics, and

• (1.4)

  P satisfies all the other requirements of this subclause.

A value-initialized object of type P produces the null value of the type. The null value shall be equivalent only to itself. A default-initialized object of type P may have an indeterminate value. [ Note: Operations involving indeterminate values may cause undefined behavior.  — end note ]

An object p of type P can be contextually converted to bool (Clause [conv]). The effect shall be as if p != nullptr had been evaluated in place of p.

No operation which is part of the NullablePointer requirements shall exit via an exception.

In Table [nullablepointer], u denotes an identifier, t denotes a non-const lvalue of type P, a and b denote values of type (possibly const) P, and np denotes a value of type (possibly const) std::nullptr_t.

A type H meets the Hash requirements if:

• (1.1)

  it is a function object type ([function.objects]),

• (1.2)

  it satisfies the requirements of CopyConstructible and Destructible ([utility.arg.requirements]), and

• (1.3)

  the expressions shown in Table [hash] are valid and have the indicated semantics.

Given Key is an argument type for function objects of type H, in Table [hash] h is a value of type (possibly const) H, u is an lvalue of type Key, and k is a value of a type convertible to (possibly const) Key.

The library describes a standard set of requirements for allocators, which are class-type objects that encapsulate the information about an allocation model. This information includes the knowledge of pointer types, the type of their difference, the type of the size of objects in this allocation model, as well as the memory allocation and deallocation primitives for it. All of the string types (Clause [strings]), containers (Clause [containers]) (except array), string buffers and string streams (Clause [input.output]), and match_results (Clause [re]) are parameterized in terms of allocators.

The template struct allocator_traits ([allocator.traits]) supplies a uniform interface to all allocator types. Table [tab:desc.var.def] describes the types manipulated through allocators. Table [tab:utilities.allocator.requirements] describes the requirements on allocator types and thus on types used to instantiate allocator_traits. A requirement is optional if the last column of Table [tab:utilities.allocator.requirements] specifies a default for a given expression. Within the standard library allocator_traits template, an optional requirement that is not supplied by an allocator is replaced by the specified default expression. A user specialization of allocator_traits may provide different defaults and may provide defaults for different requirements than the primary template. Within Tables [tab:desc.var.def] and [tab:utilities.allocator.requirements], the use of move and forward always refers to std::move and std::forward, respectively.

Note A: The member class template rebind in the table above is effectively a typedef template. [ Note: In general, if the name Allocator is bound to SomeAllocator<T>, then Allocator::rebind<U>::other is the same type as SomeAllocator<U>, where SomeAllocator<T>::value_type is T and SomeAllocator<U>::value_type is U.  — end note ] If Allocator is a class template instantiation of the form SomeAllocator<T, Args>, where Args is zero or more type arguments, and Allocator does not supply a rebind member template, the standard allocator_traits template uses SomeAllocator<U, Args> in place of Allocator::rebind<U>::other by default. For allocator types that are not template instantiations of the above form, no default is provided.

An allocator type X shall satisfy the requirements of CopyConstructible ([utility.arg.requirements]). The X::pointer, X::const_pointer, X::void_pointer, and X::const_void_pointer types shall satisfy the requirements of NullablePointer ([nullablepointer.requirements]). No constructor, comparison operator, copy operation, move operation, or swap operation on these types shall exit via an exception. X::pointer and X::const_pointer shall also satisfy the requirements for a random access iterator ([iterator.requirements]).

Let x1 and x2 denote objects of (possibly different) types X::void_pointer, X::const_void_pointer, X::pointer, or X::const_pointer. Then, x1 and x2 are equivalently-valued pointer values, if and only if both x1 and x2 can be explicitly converted to the two corresponding objects px1 and px2 of type X::const_pointer, using a sequence of static_casts using only these four types, and the expression px1 == px2 evaluates to true.

Let w1 and w2 denote objects of type X::void_pointer. Then for the expressions

w1 == w2
w1 != w2

either or both objects may be replaced by an equivalently-valued object of type X::const_void_pointer with no change in semantics.

Let p1 and p2 denote objects of type X::pointer. Then for the expressions

p1 == p2
p1 != p2
p1 < p2
p1 <= p2
p1 >= p2
p1 > p2
p1 - p2

either or both objects may be replaced by an equivalently-valued object of type X::const_pointer with no change in semantics.

An allocator may constrain the types on which it can be instantiated and the arguments for which its construct member may be called. If a type cannot be used with a particular allocator, the allocator class or the call to construct may fail to instantiate.

[ Example: the following is an allocator class template supporting the minimal interface that satisfies the requirements of Table [tab:utilities.allocator.requirements]:

template <class Tp>
struct SimpleAllocator {
  typedef Tp value_type;
  SimpleAllocator(ctor args);

  template <class T> SimpleAllocator(const SimpleAllocator<T>& other);

  Tp* allocate(std::size_t n);
  void deallocate(Tp* p, std::size_t n);
};

template <class T, class U>
bool operator==(const SimpleAllocator<T>&, const SimpleAllocator<U>&);
template <class T, class U>
bool operator!=(const SimpleAllocator<T>&, const SimpleAllocator<U>&);

 — end example ]

If the alignment associated with a specific over-aligned type is not supported by an allocator, instantiation of the allocator for that type may fail. The allocator also may silently ignore the requested alignment. [ Note: Additionally, the member function allocate for that type may fail by throwing an object of type std::bad_alloc. — end note ]

This section describes restrictions on C++ programs that use the facilities of the C++ standard library. The following subclauses specify constraints on the program's use of namespaces ([namespace.std]), its use of various reserved names ([reserved.names]), its use of headers ([alt.headers]), its use of standard library classes as base classes ([derived.classes]), its definitions of replacement functions ([replacement.functions]), and its installation of handler functions during execution ([handler.functions]).

The C++ standard library reserves the following kinds of names:

• (1.1)

  macros

• (1.2)

  global names

• (1.3)

  names with external linkage

If a program declares or defines a name in a context where it is reserved, other than as explicitly allowed by this Clause, its behavior is undefined.

If a file with a name equivalent to the derived file name for one of the C++ standard library headers is not provided as part of the implementation, and a file with that name is placed in any of the standard places for a source file to be included ([cpp.include]), the behavior is undefined.

Virtual member function signatures defined for a base class in the C++ standard library may be overridden in a derived class defined in the program ([class.virtual]).

Clauses [language.support] through [thread] and Annex [depr] describe the behavior of numerous functions defined by the C++ standard library. Under some circumstances, however, certain of these function descriptions also apply to replacement functions defined in the program ([definitions]).

A C++ program may provide the definition for any of twelve dynamic memory allocation function signatures declared in header <new> ([basic.stc.dynamic], [support.dynamic]):

• (2.1)

  operator new(std::size_t)

• (2.2)

  operator new(std::size_t, const std::nothrow_t&)

• (2.3)

  operator new[](std::size_t)

• (2.4)

  operator new[](std::size_t, const std::nothrow_t&)

• (2.5)

  operator delete(void*)

• (2.6)

  operator delete(void*, const std::nothrow_t&)

• (2.7)

  operator delete[](void*)

• (2.8)

  operator delete[](void*, const std::nothrow_t&)

• (2.9)

  operator delete(void*, std::size_t)

• (2.10)

  operator delete(void*, std::size_t, const std::nothrow_t&)

• (2.11)

  operator delete[](void*, std::size_t)

• (2.12)

  operator delete[](void*, std::size_t, const std::nothrow_t&)

The program's definitions are used instead of the default versions supplied by the implementation ([support.dynamic]). Such replacement occurs prior to program startup ([basic.def.odr], [basic.start]). The program's definitions shall not be specified as inline. No diagnostic is required.

The C++ standard library provides default versions of the following handler functions (Clause [language.support]):

• (1.1)

  unexpected_handler

• (1.2)

  terminate_handler

A C++ program may install different handler functions during execution, by supplying a pointer to a function defined in the program or the library as an argument to (respectively):

• (2.1)

  set_new_handler

• (2.2)

  set_unexpected

• (2.3)

  set_terminate

  See also: subclauses [alloc.errors], Storage allocation errors, and [support.exception], Exception handling.

A C++ program can get a pointer to the current handler function by calling the following functions:

• (3.1)

  get_new_handler

• (3.2)

  get_unexpected

• (3.3)

  get_terminate

Calling the set_* and get_* functions shall not incur a data race. A call to any of the set_* functions shall synchronize with subsequent calls to the same set_* function and to the corresponding get_* function.

In certain cases (replacement functions, handler functions, operations on types used to instantiate standard library template components), the C++ standard library depends on components supplied by a C++ program. If these components do not meet their requirements, the Standard places no requirements on the implementation.

In particular, the effects are undefined in the following cases:

• (2.1)

  for replacement functions ([new.delete]), if the installed replacement function does not implement the semantics of the applicable Required behavior: paragraph.

• (2.2)

  for handler functions ([new.handler], [terminate.handler], [unexpected.handler]), if the installed handler function does not implement the semantics of the applicable Required behavior: paragraph

• (2.3)

  for types used as template arguments when instantiating a template component, if the operations on the type do not implement the semantics of the applicable Requirements subclause ([allocator.requirements], [container.requirements], [iterator.requirements], [numeric.requirements]). Operations on such types can report a failure by throwing an exception unless otherwise specified.

• (2.4)

  if any replacement function or handler function or destructor operation exits via an exception, unless specifically allowed in the applicable Required behavior: paragraph.

• (2.5)

  if an incomplete type ([basic.types]) is used as a template argument when instantiating a template component, unless specifically allowed for that component.

Each of the following applies to all arguments to functions defined in the C++ standard library, unless explicitly stated otherwise.

• (1.1)

  If an argument to a function has an invalid value (such as a value outside the domain of the function or a pointer invalid for its intended use), the behavior is undefined.

• (1.2)

  If a function argument is described as being an array, the pointer actually passed to the function shall have a value such that all address computations and accesses to objects (that would be valid if the pointer did point to the first element of such an array) are in fact valid.

• (1.3)

  If a function argument binds to an rvalue reference parameter, the implementation may assume that this parameter is a unique reference to this argument. [ Note: If the parameter is a generic parameter of the form T&& and an lvalue of type A is bound, the argument binds to an lvalue reference ([temp.deduct.call]) and thus is not covered by the previous sentence.  — end note ] [ Note: If a program casts an lvalue to an xvalue while passing that lvalue to a library function (e.g. by calling the function with the argument move(x)), the program is effectively asking that function to treat that lvalue as a temporary. The implementation is free to optimize away aliasing checks which might be needed if the argument was an lvalue.  — end note ]

The behavior of a program is undefined if calls to standard library functions from different threads may introduce a data race. The conditions under which this may occur are specified in [res.on.data.races]. [ Note: Modifying an object of a standard library type that is shared between threads risks undefined behavior unless objects of that type are explicitly specified as being sharable without data races or the user supplies a locking mechanism.  — end note ]

[ Note: In particular, the program is required to ensure that completion of the constructor of any object of a class type defined in the standard library happens before any other member function invocation on that object and, unless otherwise specified, to ensure that completion of any member function invocation other than destruction on such an object happens before destruction of that object. This applies even to objects such as mutexes intended for thread synchronization.  — end note ]

Violation of the preconditions specified in a function's Requires: paragraph results in undefined behavior unless the function's Throws: paragraph specifies throwing an exception when the precondition is violated.

This section describes the constraints upon, and latitude of, implementations of the C++ standard library.

An implementation's use of headers is discussed in [res.on.headers], its use of macros in [res.on.macro.definitions], global functions in [global.functions], member functions in [member.functions], data race avoidance in [res.on.data.races], access specifiers in [protection.within.classes], class derivation in [derivation], and exceptions in [res.on.exception.handling].

A C++ header may include other C++ headers. A C++ header shall provide the declarations and definitions that appear in its synopsis. A C++ header shown in its synopsis as including other C++ headers shall provide the declarations and definitions that appear in the synopses of those other headers.

Certain types and macros are defined in more than one header. Every such entity shall be defined such that any header that defines it may be included after any other header that also defines it ([basic.def.odr]).

The C standard headers ([depr.c.headers]) shall include only their corresponding C++ standard header, as described in [headers].

The names and global function signatures described in [contents] are reserved to the implementation.

All object-like macros defined by the C standard library and described in this Clause as expanding to integral constant expressions are also suitable for use in #if preprocessing directives, unless explicitly stated otherwise.

It is unspecified whether any global or non-member functions in the C++ standard library are defined as inline ([dcl.fct.spec]).

A call to a global or non-member function signature described in Clauses [language.support] through [thread] and Annex [depr] shall behave as if the implementation declared no additional global or non-member function signatures.187

An implementation shall not declare a global or non-member function signature with additional default arguments.

Unless otherwise specified, global and non-member functions in the standard library shall not use functions from another namespace which are found through argument-dependent name lookup ([basic.lookup.argdep]). [ Note: The phrase “unless otherwise specified” is intended to allow argument-dependent lookup in cases like that of ostream_iterator::operator= ([ostream.iterator.ops]):

Effects:

*out_stream << value;
if (delim != 0)
  *out_stream << delim;
return *this;

 — end note ]

It is unspecified whether any member functions in the C++ standard library are defined as inline ([dcl.fct.spec]).

An implementation may declare additional non-virtual member function signatures within a class:

• (2.1)

  by adding arguments with default values to a member function signature;188 [ Note: An implementation may not add arguments with default values to virtual, global, or non-member functions. — end note ]

• (2.2)

  by replacing a member function signature with default values by two or more member function signatures with equivalent behavior; and

• (2.3)

  by adding a member function signature for a member function name.

A call to a member function signature described in the C++ standard library behaves as if the implementation declares no additional member function signatures.189

This standard explicitly requires that certain standard library functions are constexpr ([dcl.constexpr]). An implementation shall not declare any standard library function signature as constexpr except for those where it is explicitly required. Within any header that provides any non-defining declarations of constexpr functions or constructors an implementation shall provide corresponding definitions.

When the requirements for an algorithm state that it is “stable” without further elaboration, it means:

• (1.1)

  For the sort algorithms the relative order of equivalent elements is preserved.

• (1.2)

  For the remove and copy algorithms the relative order of the elements that are not removed is preserved.

• (1.3)

  For the merge algorithms, for equivalent elements in the original two ranges, the elements from the first range (preserving their original order) precede the elements from the second range (preserving their original order).

Except where explicitly specified in this standard, it is implementation-defined which functions in the Standard C++ library may be recursively reentered.

This section specifies requirements that implementations shall meet to prevent data races ([intro.multithread]). Every standard library function shall meet each requirement unless otherwise specified. Implementations may prevent data races in cases other than those specified below.

A C++ standard library function shall not directly or indirectly access objects ([intro.multithread]) accessible by threads other than the current thread unless the objects are accessed directly or indirectly via the function's arguments, including this.

A C++ standard library function shall not directly or indirectly modify objects ([intro.multithread]) accessible by threads other than the current thread unless the objects are accessed directly or indirectly via the function's non-const arguments, including this.

[ Note: This means, for example, that implementations can't use a static object for internal purposes without synchronization because it could cause a data race even in programs that do not explicitly share objects between threads.  — end note ]

A C++ standard library function shall not access objects indirectly accessible via its arguments or via elements of its container arguments except by invoking functions required by its specification on those container elements.

Operations on iterators obtained by calling a standard library container or string member function may access the underlying container, but shall not modify it. [ Note: In particular, container operations that invalidate iterators conflict with operations on iterators associated with that container.  — end note ]

Implementations may share their own internal objects between threads if the objects are not visible to users and are protected against data races.

Unless otherwise specified, C++ standard library functions shall perform all operations solely within the current thread if those operations have effects that are visible ([intro.multithread]) to users.

[ Note: This allows implementations to parallelize operations if there are no visible side effects.  — end note ]

It is unspecified whether any function signature or class described in Clauses [language.support] through [thread] and Annex [depr] is a friend of another class in the C++ standard library.

An implementation may derive any class in the C++ standard library from a class with a name reserved to the implementation.

Certain classes defined in the C++ standard library are required to be derived from other classes in the C++ standard library. An implementation may derive such a class directly from the required base or indirectly through a hierarchy of base classes with names reserved to the implementation.

In any case:

• (3.1)

  Every base class described as virtual shall be virtual;

• (3.2)

  Every base class described as non-virtual shall not be virtual;

• (3.3)

  Unless explicitly stated otherwise, types with distinct names shall be distinct types.190

Any of the functions defined in the C++ standard library can report a failure by throwing an exception of a type described in its Throws: paragraph. An implementation may strengthen the exception-specification for a non-virtual function by adding a non-throwing noexcept-specification.

A function may throw an object of a type not listed in its Throws clause if its type is derived from a type named in the Throws clause and would be caught by an exception handler for the base type.

Functions from the C standard library shall not throw exceptions191 except when such a function calls a program-supplied function that throws an exception.192

Destructor operations defined in the C++ standard library shall not throw exceptions. Every destructor in the C++ standard library shall behave as if it had a non-throwing exception specification. Any other functions defined in the C++ standard library that do not have an exception-specification may throw implementation-defined exceptions unless otherwise specified.193 An implementation may strengthen this implicit exception-specification by adding an explicit one.194

Objects constructed by the standard library that may hold a user-supplied pointer value or an integer of type std::intptr_t shall store such values in a traceable pointer location ([basic.stc.dynamic.safety]). [ Note: Other libraries are strongly encouraged to do the same, since not doing so may result in accidental use of pointers that are not safely derived. Libraries that store pointers outside the user's address space should make it appear that they are stored and retrieved from a traceable pointer location.  — end note ]

Certain functions in the C++ standard library report errors via a std::error_code ([syserr.errcode.overview]) object. That object's category() member shall return std::system_category() for errors originating from the operating system, or a reference to an implementation-defined error_category object for errors originating elsewhere. The implementation shall define the possible values of value() for each of these error categories. [ Example: For operating systems that are based on POSIX, implementations are encouraged to define the std::system_category() values as identical to the POSIX errno values, with additional values as defined by the operating system's documentation. Implementations for operating systems that are not based on POSIX are encouraged to define values identical to the operating system's values. For errors that do not originate from the operating system, the implementation may provide enums for the associated values.  — end example ]

Objects of types defined in the C++ standard library may be moved from ([class.copy]). Move operations may be explicitly specified or implicitly generated. Unless otherwise specified, such moved-from objects shall be placed in a valid but unspecified state.