The lifetime of an object is a runtime property of the object. An object is said to have non-trivial initialization if it is of a class or aggregate type and it or one of its members is initialized by a constructor other than a trivial default constructor. [ Note: initialization by a trivial copy/move constructor is non-trivial initialization. — end note ] The lifetime of an object of type T begins when:
storage with the proper alignment and size for type T is obtained, and
if the object has non-trivial initialization, its initialization is complete.
The lifetime of an object of type T ends when:
if T is a class type with a non-trivial destructor ([class.dtor]), the destructor call starts, or
the storage which the object occupies is reused or released.
[ Note: The lifetime of an array object starts as soon as storage with proper size and alignment is obtained, and its lifetime ends when the storage which the array occupies is reused or released. [class.base.init] describes the lifetime of base and member subobjects. — end note ]
The properties ascribed to objects throughout this International Standard apply for a given object only during its lifetime. [ Note: In particular, before the lifetime of an object starts and after its lifetime ends there are significant restrictions on the use of the object, as described below, in [class.base.init] and in [class.cdtor]. Also, the behavior of an object under construction and destruction might not be the same as the behavior of an object whose lifetime has started and not ended. [class.base.init] and [class.cdtor] describe the behavior of objects during the construction and destruction phases. — end note ]
A program may end the lifetime of any object by reusing the storage which the object occupies or by explicitly calling the destructor for an object of a class type with a non-trivial destructor. For an object of a class type with a non-trivial destructor, the program is not required to call the destructor explicitly before the storage which the object occupies is reused or released; however, if there is no explicit call to the destructor or if a delete-expression ([expr.delete]) is not used to release the storage, the destructor shall not be implicitly called and any program that depends on the side effects produced by the destructor has undefined behavior.
Before the lifetime of an object has started but after the storage which the object will occupy has been allocated40 or, after the lifetime of an object has ended and before the storage which the object occupied is reused or released, any pointer that refers to the storage location where the object will be or was located may be used but only in limited ways. For an object under construction or destruction, see [class.cdtor]. Otherwise, such a pointer refers to allocated storage ([basic.stc.dynamic.deallocation]), and using the pointer as if the pointer were of type void*, is well-defined. Indirection through such a pointer is permitted but the resulting lvalue may only be used in limited ways, as described below. The program has undefined behavior if:
the object will be or was of a class type with a non-trivial destructor and the pointer is used as the operand of a delete-expression,
the pointer is used to access a non-static data member or call a non-static member function of the object, or
the pointer is implicitly converted ([conv.ptr]) to a pointer to a virtual base class, or
the pointer is used as the operand of a static_cast ([expr.static.cast]), except when the conversion is to pointer to cv void, or to pointer to cv void and subsequently to pointer to either cv char or cv unsigned char, or
the pointer is used as the operand of a dynamic_cast ([expr.dynamic.cast]). [ Example:
#include <cstdlib>
struct B {
virtual void f();
void mutate();
virtual ~B();
};
struct D1 : B { void f(); };
struct D2 : B { void f(); };
void B::mutate() {
new (this) D2; // reuses storage — ends the lifetime of *this
f(); // undefined behavior
... = this; // OK, this points to valid memory
}
void g() {
void* p = std::malloc(sizeof(D1) + sizeof(D2));
B* pb = new (p) D1;
pb->mutate();
&pb; // OK: pb points to valid memory
void* q = pb; // OK: pb points to valid memory
pb->f(); // undefined behavior, lifetime of *pb has ended
}
— end example ]
Similarly, before the lifetime of an object has started but after the storage which the object will occupy has been allocated or, after the lifetime of an object has ended and before the storage which the object occupied is reused or released, any glvalue that refers to the original object may be used but only in limited ways. For an object under construction or destruction, see [class.cdtor]. Otherwise, such a glvalue refers to allocated storage ([basic.stc.dynamic.deallocation]), and using the properties of the glvalue that do not depend on its value is well-defined. The program has undefined behavior if:
an lvalue-to-rvalue conversion ([conv.lval]) is applied to such a glvalue,
the glvalue is used to access a non-static data member or call a non-static member function of the object, or
the glvalue is bound to a reference to a virtual base class ([dcl.init.ref]), or
the glvalue is used as the operand of a dynamic_cast ([expr.dynamic.cast]) or as the operand of typeid.
If, after the lifetime of an object has ended and before the storage which the object occupied is reused or released, a new object is created at the storage location which the original object occupied, a pointer that pointed to the original object, a reference that referred to the original object, or the name of the original object will automatically refer to the new object and, once the lifetime of the new object has started, can be used to manipulate the new object, if:
the storage for the new object exactly overlays the storage location which the original object occupied, and
the new object is of the same type as the original object (ignoring the top-level cv-qualifiers), and
the type of the original object is not const-qualified, and, if a class type, does not contain any non-static data member whose type is const-qualified or a reference type, and
the original object was a most derived object ([intro.object]) of type T and the new object is a most derived object of type T (that is, they are not base class subobjects). [ Example:
struct C {
int i;
void f();
const C& operator=( const C& );
};
const C& C::operator=( const C& other) {
if ( this != &other ) {
this->~C(); // lifetime of *this ends
new (this) C(other); // new object of type C created
f(); // well-defined
}
return *this;
}
C c1;
C c2;
c1 = c2; // well-defined
c1.f(); // well-defined; c1 refers to a new object of type C
— end example ]
If a program ends the lifetime of an object of type T with static ([basic.stc.static]), thread ([basic.stc.thread]), or automatic ([basic.stc.auto]) storage duration and if T has a non-trivial destructor,41 the program must ensure that an object of the original type occupies that same storage location when the implicit destructor call takes place; otherwise the behavior of the program is undefined. This is true even if the block is exited with an exception. [ Example:
class T { };
struct B {
~B();
};
void h() {
B b;
new (&b) T;
} // undefined behavior at block exit
— end example ]
Creating a new object at the storage location that a const object with static, thread, or automatic storage duration occupies or, at the storage location that such a const object used to occupy before its lifetime ended results in undefined behavior. [ Example:
struct B {
B();
~B();
};
const B b;
void h() {
b.~B();
new (const_cast<B*>(&b)) const B; // undefined behavior
}
— end example ]
In this section, “before” and “after” refer to the “happens before” relation ([intro.multithread]). [ Note: Therefore, undefined behavior results if an object that is being constructed in one thread is referenced from another thread without adequate synchronization. — end note ]
For example, before the construction of a global object of non-POD class type ([class.cdtor]).
That is, an object for which a destructor will be called implicitly—upon exit from the block for an object with automatic storage duration, upon exit from the thread for an object with thread storage duration, or upon exit from the program for an object with static storage duration.